This IKEA PAX Hack Resulted In a Built-In Closet That Looks Authentically Turn-of-the-Century
DIY molding gives this built-in wall closet a paneled look that blends seamlessly into this period property
When it comes to creating a built-in closet, you can always rely on IKEA's PAX. With this versatile system, you can decide the size and shape of your wardrobe to maximize every inch of storage space. But alas, the simple, ubiquitous design of IKEA's flat-pack furniture often falls short, and it certainly doesn't belong in a turn-of-the-century home. Or does it?
This IKEA hack proves that with a few simple tweaks, contemporary flat-pack furniture has a rightful place in period properties. Homeowners Frances and Benjamin — who share the renovation of their 1899 home on their Instagram @itsnotsogrimupnorth — wanted a built-in wall closet that fitted seamlessly into their turn-of-the-century home. By combining IKEA's PAX and EKET cabinets and putting their DIY skills to the test, they designed this elegant DIY that blends in beautifully in their color-drenched bedroom.
Below, the couple breaks down how they transformed their IKEA flat-packs into an authentic-looking Victorian built-in wardrobe.
Before.
Image credit: Frances Ellen Shaw / Benjamin Franklin (@itsnotsogrimupnorth)
After.
Image credit: Frances Ellen Shaw / Benjamin Franklin (@itsnotsogrimupnorth)
Frances and Ben's home is a typical turn-of-the-century home found in cities in the northern hemisphere — think high ceilings, bay windows, and decorative period features like ceiling roses and crown molding. However, like many other Victorian homes, it also has awkward spaces that don't utilize space.
After knocking out part of the wall in their main bedroom in an effort to make their alcoves more symmetrical, they realized they couldn't remove the structural area in the middle (likely the chimney flue), so they decided to opt for a built-in storage solution instead. "We’re in the process of renovating the entire house, so bespoke built-in units were out of our budget," explains Frances.
Naturally, they turned to the next best thing: IKEA. "We knew this way we could get the classic symmetry we wanted while saving some money and hiding the awkward architecture by only compromising a small section of the interior in one of the units," Frances notes. "With some careful planning and IKEA's PAX planner builder tool, we managed to come up with a design that would work in the space."
To bridge the gap between the closets in each alcove, they bought two EKET cabinets with double doors. Frances admits that she and Ben are more attuned to design than DIY, so when it came to construction, they had a little extra help in the form of Ben’s dad.
"We used a jigsaw to cut the back of one of the PAX units to fit perfectly into the shape of the alcove and also slimmed down the EKET units so that they fit in line with the PAX frames," Ben explains.
Once all the dimensions of the individual systems were flush, Ben and Frances built a timber frame to lift all the units off the floor. To create the built-in look for their bedroom, they then used MDF boards to fill the gaps between each section.
"Afterward, we plasterboarded from the ceiling down and lightly skimmed everything in," Ben says. "The ceiling had been lowered and plastered anyway as it was covered in horrible artex, so this was the ideal solution for us."
After the frames were complete and everything was fixed to the wall, they then used an MDF window board with a bullnose edge as a DIY shelf on top of the EKETS. To create a traditional paneled look on the simple IKEA cabinets, they added pine wood molding to all the doors.
Once these were dry, it was time to paint. Ben and Frances knew they wanted to color-drench their space by painting their fifth wall the same shade as their other walls for a bedroom that feels airy and elegant, but with a modern twist.
"For the color, we loved Lick’s Pink 03 — we were aiming to create a room that had the feeling of a Parisian boutique hotel," says Frances. After going in with a coat of Zinsser B-I-N primer, they then added the color.
Pink's not going anywhere in 2023, and as far as color drenching goes, it's one of our favorites. Pink 03 makes a space feel creative and carefree with a hint of classiness. This bubblegum shade also has a subtle grey undertone to rein things in.
According to Ben and Frances, it was the painting that was the most time-consuming of all. "We found that the key to a smooth finish is to sand very lightly between coats and to paint the molding with a brush first before going over the door with a small roller to keep as flat a texture as possible," explains Ben. "It was a pretty monotonous process, but definitely worth the effort."
They finished off the wall closet with a coat of clear furniture varnish and added some modern brass hardware from Plank (the STACK ribbed T-bar handle and the LOVELL circular knobs) to give it a more modern, transitional style.
To help their wall closet look as though it was an original feature of the property, they chose to add coving around the top edge, which they carried along the entire ceiling. This attention to detail is what makes this built-in wardrobe look so traditional and authentic. It really is the little things that count.
Although they're new, these brass cabinet knobs have a vintage feel thanks to the distressed look. The gold pairs beautifully with pink if you want to recreate Ben and Frances' look, but they look just as sophisticated on a white or black backdrop.
"We absolutely love the final result," says Frances. "As our combined design style is a blend of traditional with some more contemporary touches, we can’t imagine anything else working as well for us in the space without spending on custom carpentry."
They've already found a legion of fans on Instagram who are hailing Frances and Ben's bedroom as ‘the pink room of dreams’. It's a label Frances and Ben would be more than happy to catch on!
